Please activate JavaScript!
Please install Adobe Flash Player, click here for download

CIMCO Catalog 2014

288 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Design/colour Width/mm Length/m PU Article no. Design/colour Width/mm Length/m PU Article no. Medium-walled black heat shrink tube, shrinkage ratio 3 : 1, lined with adhesive halogen-free, medium-walled, yet very flexible standard electrical shrink tube with shrinkage ratio 3 : 1 (shrinkage capacity down to one third of the internal diameter before heat shrinkage). Thanks to outstanding mechanical stability and chemical resistance, this tube is very suitable for electrical insulation, as bend and abrasion protection, as damp protection for seals, for bundling, for strain relief and for identification in electronics and electrics, telecommunications, cable assembly, in the automotive industry and many other areas. Particularly suitable, thanks to shrinkage ratio 3:1, for balancing out large differences in diameter in the object to be shrink wrapped, e. g. markedly contoured parts such as connection sleeves, plugs and switches, and also for covering a wide range of applications with few shrink tube sizes. Excellent sealing properties thanks to the inner lining of special hot melt adhesive, providing outstanding protection against water and moisture penetration. The melting temperature of the hot melt adhesive is at approx. +70 °C to +80 °C. Dispensing rolls, robust, environmentally friendly cardboard rolls, diameter approx. 300 mm - 550 mm (according to size of shrink tube), core hole diameter approx. 30 mm, particularly suitable for industrial use. Nominal ø Shrink range Length BEFORE shrinking mm m Inch mm 1/8 3.2 1.0 up to 3.1 200 1 roll 18 4306 1/4 6.4 2.4 up to 6.4 100 1 roll 18 4308 Heat shrink tube in 1.22 metre sections 3/8 9.6 3.4 up to 9.4 1.22 1 18 4310 1/2 12.7 4.4 up to 12.5 1.22 1 18 4312 3/4 19 6.5 up to 18.8 1.22 1 18 4314 1 25.4 8.8 up to 25 1,22 1 18 4316 1 1/2 38.1 14.0 up to 39 1,22 1 18 4318 2 50.8 17.5 up to 49 1.22 1 18 4320 Hot air blower range robust, tried and tested “Made in Germany” device for all standard hot air applications up to max. 500 °C, e. g. unthawed water pipes, heat shrinking, drying and removing paint, shaping plastic, soft-soldering, etc. With 2 heat settings: Setting 1 up to 300 °C and 240 litres/min. air flow, setting 2 up to 500 °C and 500 litres/min. air flow, wattage 1600 W, 230 – 240 volt, 50 Hz, with strong rubber connecting lead, double overheating protection, suitable for hand-held and for stand use. Weight 700 g Delivery includes 2 push-on nozzles: reflector nozzle (for all-round even heat for soft soldering of thin copper pipes, for heat shrinking of shrink tubes and shaping PVC tubes), soldering reflector nozzle (for simultaneous soldering and shrinking of soldering sleeves). 240 x 200 mm 1 18 1351 Advice and ordering: Phone: +49 (0)2191 3718 01, Fax: +49 (0)2191 3718 85, E-mail: info@cimco.de

Seitenübersicht