CIMCO Catalog 2015_16

258 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Advice and ordering: Phone: +49 (0 ) 02191/3718- 01, Fax: +49 (0) 2191/3718- 85, E-Mail: order@cimco.de Photovoltaic connector system Using this new photovoltaic connector saves time and effort at the construction site. The CIMCO connector system is compatible with the MC4 market standard and fits all common solar cables from 2.5 mm2 to 6 mm2 . Consisting of a plug and socket connection system, including plastic housing; package contains 100 plugs – crimp contacts and plastic housing in a plastic bag and 100 sockets – crimp contacts and plastic housing in a plastic bag. Specifications: 2.5 to 6 mm2 , voltage range: 1000 V, current capacity: 30 A (4 mm2 , 6 mm2 ), contact resistance of the connector system: 5 mΩ, diameter of the plug contact: 4 mm, protection class: IP 67, temperature range: -40 C / +85 C°, insulation material: PC/PA, contact material: copper, silver-plated, Safety class: II, certification: TÜV, crimping range: 2.5 - 6 mm2 100 18 0000 Photovoltaic MC3 adapter system Adapter set for attaching to MC3 contacts, for crimping with MC4 compatible tools 1.5 to 4 mm2 Consisting of an MC3 plug and socket adapter system, including plastic housing; package contains 1 plug – crimp contacts and plastic housing and 1 socket – crimp contacts and plastic housing. Specifications: Pin dimensions: ø 3.0 mm, cable diameter: ø 5.0 mm to ø 8.0 mm, cable cross section: 1.5 – 4.0 mm2 , AWG 16/14/12, contact type: stamp roll contact, nominal voltage: 1000 V DC, nominal current: 25 A at 70 °C / 20 A at 85 °C, contact resistance: <5 mΩ ohm, protection class: IP 67, temperature range: -40 °C / + 90 °C, certification: TÜV 1 18 0003 Photovoltaic MC4 unlocking tool Unlocking tool for releasing the plug connection of photovoltaic connectors. 1 18 0004 Photovoltaic MC4 Y-distributor Y-distributor on an MC4 basis. Specifications: Pin dimensions: ø 4.0 mm, contact type: stamp roll contact, nominal voltage: 1000 V DC, nominal current: 30 A at 70 °C / 25 A at 85 °C, contact resistance: <5 mΩ ohm, protection class: IP 67, temperature range: -40 °C / + 90 °C, certification: TÜV MMF = 1 x female input and 2 x male outputs 1 18 0005 FFM = 1 x male input and 2 x female outputs 1 18 0006 Earthing terminal SOLFIL CIMCO’s secure and permanent solution for earthing PV panels. The choice for simple and permanent protection. It is necessary to protect photovoltaic panels by earthing. It should be permanent and guarantee protection against the effects of lightning strikes and electromagnetic interferences over the entire service life. The connection series offers you solutions that suit the various types of photovoltaic panels. A secure earthing connection is provided by the establishment of an optimal electrical contact between the panel housing and the earthing conductor. The module frames are made of aluminium that is anodised or whose surface is otherwise treated. These surface treatments protect against rust but are not conductive. Thanks to the series, electrical contact with the aluminium of the panel is possible. Either with a cutting thread with the screwed models, or secured by deepening the thread with a bolt connection with the help of serrated washers that scrape off the anodised layer when tightened. The connection is secured by tightening the earthing conductor with a maximum cross section of 10 mm2 . With an insulated conductor you have to remove the insulation to 30 mm. The models are made of stainless steel which guarantees rust protection and galvanic compatibility with the aluminium. Attachment to an existing bore with bolt for bore ø 6 mm (0.26’’). The serrated washer ensures the electrical contact. Cross section range of the earthing conductor in mm2 [multi-stranded or solid]: 4, 6, 10, 4+4, 6+6 1 18 8012 100180000 1180003 1180004 MMF = 1 x female input and 2 x male outputs 1180005 FFM = 1 x male input and 2 x female outputs 1180006 1188012

Seitenübersicht