CIMCO Catalog_2017_18

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 289 Design Width/mm Length/mm PU Article no. Design Width/mm Length/mm PU Article no. Advice and ordering: Phone: +49 (0)2191 3718-01, Fax: +49 (0)2191 3718-85, E-mail: order@cimco.de Special adhesive tapes Aluminium foil adhesive tape Description: Aluminium foil, 40 µm (0.04 mm) thick, coated on one side with pressure sensitive acrylic adhesive. The tape is laminated with strong, polyethylene-coated separating paper. Special features: Heat deflecting, light reflecting, moisture resistant, very low water permeability (water vapour barrier). Typical areas of use: Heat protection and shielding of electromagnetic fields on electronic equipment, sealing of cooling insulation, bonding of intersections of aluminium foil-laminated insulation mats and insulating panels made from rock wool or fibre glass, sealing of metal or plastic ducts, applications with more stringent requirements of preventive fire protection, e.g. flame protection wrap for the installation of cables. silver-coloured 50 50 24 16 2900 Filament adhesive tape with mesh thread reinforcement Description: Carrier layer made from polypropylene, reinforced with meshed nylon threads running lengthwise and across for the full length of the tape, coated on one side with rubber adhesive. Special features: Excellent resistance to abrasion, extremely tear resistant (longitudinal and lateral strength), no fraying at the sides, strong immediate adhesion. Typical areas of use: Bundling and pulling through cables and wiring harnesses, high-strength package tape for sealing and reinforcing even heavy packages, e.g. cardboard boxes and cartons, strapping heavy packages and other goods, banding plastic and metal tubes, metal rods, etc. transparent 50 50 18 16 2950 Double-sided adhesive foam tape Description: Closed-cell polyethylene foam, coated on both sides with acrylic-based adhesive, comes with separating paper. Special features: Excellent resistance to pressure, very pliable, very good resistance to UV, ageing, moisture, oils, solvents and softeners, strong immediate adhesion. Typical areas of use: Used for diverse installations of heavy loads, even vertical, indoors and outdoors, instead of riveting, screwing and liquid adhesives, also particularly good for bonding onto non-elastic materials with irregular, rough surfaces (wood, masonry, concrete, coats of paint): surface-mounting of cable ducts, cable clamps, switchboxes, attachment of badges, displays and signs, both made from and onto plastic, shock-proof and vibration-damped soft mounting of assemblies (e.g. circuit boards, switch panels, fittings), effective reduction of the transmission of noise (rattle protection), form-fit seals against dust, water, vapour, wind and light, also for sealing air outlets to save energy. white 15 33 20 16 2861 19 33 16 16 2862 25 33 12 16 2863 Paper masking tape Low crepe paper masking tape, 0.16 mm. thick. Medium adhesion thanks to rubber-based adhesive. Suitable for indoor use. Special features: High tear resistance of approx. 114 N / 25 mm and medium adhesion of 6.2 N / 25 mm. Temperature resistant up to max. 85 °C for 1 hour. The crepe allows it to adapt very well to different substrates and radii. Typical areas of use: Masking of areas to be blocked when painting and varnishing. beige 19 50 1 16 0302 25 50 1 16 0304 38 50 1 16 0306 50 50 1 16 0308 Advice and ordering: Phone: +49 (0)21913718-01, Fax: +49 (0)21913718-85, E-mail: order@cimco.de silver-coloured 505024162900 transparent 505018162950 white 153320162861 193316162862 253312162863 beige 19501160302 25501160304 38501160306 50501160308

Seitenübersicht