CIMCO Catalog_2017_18

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 79 Design Size/mm PU Article no. Design Size/mm PU Article no. Advice and ordering: Phone: +49 (0)2191 3718-01, Fax: +49 (0)2191 3718-85, E-mail: order@cimco.de AC/DC voltage tester to 690 V • Automatic polarity detection • Bright LED display • Quick single lever testing at earthed contact sockets • Impact-resistant, modern housing • Test probe protection • Nominal voltages: 12 - 690 V AC/DC • Display: 8 LEDs • Automatic polarity display (+12 V, -12 V, 24 V, 50 V, 120 V, 230 V, 400 V, 690 V) • Frequency range: AC 0 - 65 Hz • Power consumption < 3.5 mA at 690 V AC L-PE • Measurement category: CAT III 600 V, CAT IV 300 V • Tested in accordance with EN 61243-3:2010, IEC 61010-1 • Protection class: IP 64 • CE certified • Cable length: 1.2 m • Weight: 115 g • Works without batteries 205 x 55 x 21 1 11 1436 Continuity and circuit tester DUTEST • With additional torch function (continuous light) • LED and buzzer • Two-stage range indicator: 0 - 900 Ω/0 - 90 kΩ • Low-resistance measuring range: 0 - 900 Ω • Visual by means of diode display (LED) • With external voltage protection • High-resistance measuring range: 0 - 90 kΩ • Tested and certified in accordance with VDE 0403 • Protection class IP 40 1 11 1435 Continuity tester • For resistance, semiconductor, polarity and • With acoustic signal and visual display with capacitor testing (0.01 to 1000 µF) resistance-dependent tone pitch • Resistance range 0 to 500 kΩ • Testing current approx. 2.2 mA • External voltage display > 50 V • Electric strength up to 600 V • Power supply 1 battery 9 V IEC 6LR61 • Weight 230 g 100 x 50 x 25 1 11 1400 Digital Multimeter • Safety pursuant to DIN VDE 0411, • 33 /4-digit digital display with 4000 digits EN 61010, IEC 61010, CAT III 600 V • Voltage, current and resistance measurement • Visual (LED) and acoustic continuity test • Temperature, capacity and • Device complies with the directive (2002/96/EC) WEEE frequency measurement • Shock- and impact-proof due to • Automatic measuring range selection protective sleeve included as standard 155 x 75 x 33 1 11 1404 Clip-on adapter can be used in combination with any digital multimeter with a range of 200 mV/2 V alternating current to carry out current measuring. The connection is made directly at the 4 mm input jack on the multimeter. • Measurement range: 0 A to 300 A at 1.5% ± 2 A • Conversion 1 A AC corresponds to 1 mV • Operating temperature: 0 °C to 50 °C • Width of opening max. 28 mm 1 11 1414 Clip-on measuring instrument • Small measuring tool for one-hand operation • Pincer opening 30 mm • Measurement range alternating current up to 40 A/400 A • Alternating voltage up to 600 V • Direct voltage up to 400 V/600 V • Resistance up to 400 Ω / 4000 • Measurement accuracy ± 2% • Large LC display (max. 3999) • Data hold button for easier reading • Continuity test with acoustic display • Charging status display • Overload protection 480 A AC /720 V AC • Weight only 250 g including batteries • Supplied with 2 R03 batteries (1.5 volt DC) • Automatic switch-off after ca. 10 minutes • 1 set of test leads with no operation (energy saving function) 184 x 44 x 27 1 11 1413 Advice and ordering: Phone: +49 (0)21913718-01, Fax: +49 (0)21913718-85, E-mail: order@cimco.de 205 x 55 x 211111436 1111435 100 x 50 x 251111400 155 x 75 x 331111404 1111414 184 x 44 x 271111413

Seitenübersicht